Page 1 of 2 12 LastLast
Results 1 to 50 of 71

Thread: D300 ~ Let's Chat

  1. #1
    Forum Participant
    Join Date
    Jan 2008
    Location
    Haverhill, Massachusetts
    Posts
    1,647
    Threads
    313
    Thank You Posts

    Default D300 ~ Let's Chat

    I've been through 4 D300 bodies, the first being DOA (I can sort of accept that) and the next three suffering ongoing power issues / lockup and really less than stellar focus abilities, especially beyond 25 yards.

    The AF is slow to get off the block, hunts badly on large subjects at times and simply isn't as "critically caccurate" as what i've experienced on my previos D2Xs bodies..especially on moving subjects.

    This has happened with both my previous 500 AFSII and my current 500 VR, along with other lenses.

    I am shooting with an ENEL3 in the body and ENEL4A in the grip.

    Yes...they of course have been back to Nikon :)

    Is anyone other than me having these issues???????

  2. #2
    BPN Viewer
    Join Date
    Feb 2008
    Location
    Jackson, Wyoming and the Outer Banks of North Carolina
    Posts
    136
    Threads
    51
    Thank You Posts

    Default

    now these are problems that I have been having as well. However, I was passing this stuff off as my sigma lenses were not communicating with the body properly. My play back and stuff does lock up though I have found that sometimes it is my fault. Why Nikon would choose to place the pop up flash's exposure control button right next to where my hand rests on the camera is beyond me. A lot of the times, i find that my hand is pressing up against that and so nothing will work untill i move my hand.

    I was at a wolf sanctuary 2 weeks ago shooting for a magazine story and after a good 8 hours of working, I came home only to find that nearly every single photograph was just slightly out of focus - all to the same degree. Like I said though, I assumed it was my lens. I am renting a lens this week to take back down there and find out one way or another. If its not my lens, I'm dumping the D300 and will just pick up a used D2xs body.

    Is this a problem with the D3 as well?

  3. #3
    BPN Viewer
    Join Date
    Feb 2008
    Location
    Jackson, Wyoming and the Outer Banks of North Carolina
    Posts
    136
    Threads
    51
    Thank You Posts

    Default

    one more thing, this issue has been raised by a number of people on nikonians as well. Also, there is a D300 firmware update available on Nikonusa.com. I bought my d300 in Februray and it came with the 1.01 update.... this is the 1.02. Not really sure how much difference that is going to make, but I like to stay updated with firmware versions.
    Last edited by Jared Lloyd; 03-26-2008 at 10:02 AM.

  4. #4
    Forum Participant
    Join Date
    Jan 2008
    Location
    Haverhill, Massachusetts
    Posts
    1,647
    Threads
    313
    Thank You Posts

    Default

    The firmware update, according to Nikon, simply addresses issues in exposures greater than 8 seconds in length.

    I loaded it and it did nothing to correct the ongoing issues which i'm encountering.

  5. #5
    BPN Viewer
    Join Date
    Jan 2008
    Location
    Viera, Florida
    Posts
    92
    Threads
    24
    Thank You Posts

    Default

    I have he D3 and D300, both with close to 10,000 activations on them. I've shot with the 500mm f/4, 300mm f/4, 70-200mm VR, 80-400mmm VR, and 28-70mm 2.8 lenses and the 1.4 and 1.7 TCs. I have no major problems with either camera.

    The D300 has a slight hesitation before the AF locks on the subject. The AF on both bodies is a significant improvement over the D2x and D200 I was shooting with previously. The AF systems on the 3 and the 300 are more complex and I have to think a little bit more when I'm in the field about which settings to use but I've experienced no problems with the AF.

  6. #6
    Robert Amoruso
    Guest

    Default

    Harry,

    Any chance on getting you to elaborate on your AF settings?

  7. #7
    Forum Participant
    Join Date
    Jan 2008
    Location
    Haverhill, Massachusetts
    Posts
    1,647
    Threads
    313
    Thank You Posts

    Default

    From a Nikon CA D300 user shooting a 500 as well:

    1. Autofucus won't work. Remedy: reseat lens/TC.
    2. Battery shows dead. Remedy: switch camera off and on again.
    3. Autofocus loses target and stops. Remedy: switch camera off and on again.
    4. Autoexposure failure - underexposes. Extreme case, black frame. No remedy.
    5. Shortened battery charge life (around 50%). No remedy.

    Sounds as if I'm not the only one.

  8. #8
    BPN Viewer
    Join Date
    Jan 2008
    Location
    Viera, Florida
    Posts
    92
    Threads
    24
    Thank You Posts

    Default

    Quote Originally Posted by Robert Amoruso View Post
    Harry,

    Any chance on getting you to elaborate on your AF settings?
    It all depends on the circustances. If my subject is a snowy egret and it is against the water I've found that the 51 points dynamic AF to be excellent. You have a light subject against darker water and strong contrast in the scene. Now if you put an anhinga in the same settings you have less contrast and I've found that using 21 or 9 points to be more effective. I have yet to find a situation where the 3D tracking is effective for me. I have also found that with small subjects that 9 points has been the most effective setting for me so far.

    I'm still experimenting with different combinations (I'm a slow learner) so none this is final by any stretch of the imagination.

  9. #9
    Alfred Forns
    Guest

    Default

    Sure wish you could get your hands on a functioning D300 Jim You have had an ordeal !!!

    Both my D300 and D3 have been working well No issues

    I am starting to trust the 51 point dynamic more and more Even on static subjects I let the point dance around and lock it when is at the point I want It is particularly good for flight. Just like using Canon 45 point For cluttered bg I will go to the center point.

    One thing I have noticed is getting sloppy with the point placement and trusting the AF entirely When it is on one point I'm very careful in keeping the point on the bird. On large birds I actually try to locate the point on the head/neck area

    My biggest difference in keeper (critically sharp) has to do with lighting differences AF systems do not perform the same with all types of light Overall I feel both are performing better than my MK2n

  10. #10
    Forum Participant
    Join Date
    Jan 2008
    Location
    Haverhill, Massachusetts
    Posts
    1,647
    Threads
    313
    Thank You Posts

    Default An Update

    This afternoon, Nikon called after some testing I'd done yesterday at their request and had me send the camera, grip, batteries and CF CARDS overnight to Melville as they are exploring and and all possibilities for these failures.

    They are overnighting me all new gear, plus a D2Xs loaner...just in case.

    I've got a ton of shooting to do the next three weeks to finish off a year long project that opens in a 7 month show on 5/3..so this is a great relief for the moment.

  11. #11
    Robert O'Toole
    Guest

    Default

    Quote Originally Posted by Jim Fenton View Post
    This afternoon, Nikon called after some testing I'd done yesterday at their request and had me send the camera, grip, batteries and CF CARDS overnight to Melville as they are exploring and and all possibilities for these failures.

    They are overnighting me all new gear, plus a D2Xs loaner...just in case.

    I've got a ton of shooting to do the next three weeks to finish off a year long project that opens in a 7 month show on 5/3..so this is a great relief for the moment.
    Sorry to hear the problems Jim. They are the first I have heard with a D300. All friend's and my own are 100% working.



    Robert

  12. #12
    Jeff Wear
    Guest

    Default

    Jim my 300 has been to Nikon 3 times they have had it more than I have. Long distance focus ,tracking and with mine after hrs of shooting the shutter no matter what the speed setting sound slow ,this will give you in the same second a different exposure in 2 shots ?? I have talked with a lot of folks and they have similar trouble but write it off to lens or lack of experience .

  13. #13
    Todd Frost
    Guest

    Default

    Sorry to hear you are having problems Jim. I've had mine for only a few months and have not had any problems to this point. I have the D2h, D200 and the D300 with in my opinion the 300 is far superior in every way. The af on the 2h and the 2x are the same and the 300 seems to focus better to me. Again sorry to hear of your problems, hope Nikon can sort it out for you.
    Todd

  14. #14
    Walt Anderson
    Guest

    Default

    Jim, thanks for starting this thread. I have just returned from a two day session at Elephant Head pond in AZ using a 200-400 and a D300 from blinds with both 1.4 and 1.7 converters. First let me say that the versitilty of this combo is the best I have used in working from blinds. I have many great photos from the time there. I also had many times of frustration as the camera would completely fail to focus when changing from perch to perch. Also noted the comment above about a hesitation to lock on. I found many times that the camera would almost focus on a bird but if I lifted off the shutter button and tried again the focus would tweak into perfect focus. Using 51 point 3D settings lead to very inconsistent results in this type of photography. Center point was the the most consistent, pretty much like always. The IQ when everything work was fantastic. I have only used the current Nikon's for three months so am still on a learning curve and looking for answers. I did not have the opportunity to try tracking very much but was not impressed when I did. I believe that my experiences match Harry's as stated in his post. Please do not get the impression that I think this is a bad camera. I suspect that like any equipment we need to learn how to use it and to practice our techniques. But don't think that switching systems that your auto focus issues will go away. Good thread with lots on info so far.

    Walt Anderson
    Visual Echoes Inc.

  15. #15
    BPN Viewer
    Join Date
    Jan 2008
    Location
    Viera, Florida
    Posts
    92
    Threads
    24
    Thank You Posts

    Default

    Quote Originally Posted by Jeff Wear View Post
    Jim my 300 has been to Nikon 3 times they have had it more than I have. Long distance focus ,tracking and with mine after hrs of shooting the shutter no matter what the speed setting sound slow ,this will give you in the same second a different exposure in 2 shots ?? I have talked with a lot of folks and they have similar trouble but write it off to lens or lack of experience .
    Sorry about your problems but I've had a completely different experience. Back in February I hosted a annual wildlife shoot on the Space Coast. We had over 50 photographers attend and many were using the D300. Not one person in the group had a problem with their D300.
    Before and after Feb. I've been out with numerous D300 users and again no one experienced a problem with the camera.

  16. #16
    Fabs Forns
    Guest

    Default

    Mine works fine, but the D3 has better (faster and more precise) AF.

  17. #17
    Forum Participant
    Join Date
    Jan 2008
    Location
    Haverhill, Massachusetts
    Posts
    1,647
    Threads
    313
    Thank You Posts

    Default

    The AF isn't the biggest problem although it's a big one itself.

    The worst issue is the camera going from full charge to showing dead in an instant, the AF quits, the camera locks up and at times I haven't even been able to shut them down and have had to remove batteries from both the grip and the camera body in order to restore use of the camera. I am sure that Nikon is looking into it as more and more folks are reporting it.

    I'll have new replacement gear from Nikon again today...includiung CF cards (they asked for mine) and a D2Xs back-up..just in case as a loaner.

  18. #18
    Fabs Forns
    Guest

    Default

    Good luck, Jim, hope this helps solved to your satisfaction. I know how frustrating this can be.

  19. #19
    john crookes
    Guest

    Default

    The phantom dead battery has been reported in a couple of forums with an assortment of remedies to fix the problem.

    But some of the remedies will also void the warranty so I would beware

    It happened once on my d300 and it was when I was using my 200mm f2 and the 1.7 extender

    handheld and when i picked up the camera to my face if you do not hold by the lens it gives a dead battery sign

    i belive people are experiencing the same problem that was reported with the d200

  20. #20
    Robert O'Toole
    Guest

    Default

    Quote Originally Posted by Jim Fenton View Post
    The AF isn't the biggest problem although it's a big one itself.

    The worst issue is the camera going from full charge to showing dead in an instant, the AF quits, the camera locks up and at times I haven't even been able to shut them down and have had to remove batteries from both the grip and the camera body in order to restore use of the camera.
    Jim,
    Is there a specific reason you are using 2 batteries in 2 positions, body and grip? I normally leave the EN-EL3e battery at home to save weight and use a EN-EL4 in the MB-D10 Battery Pack. Just curious.

    Robert

  21. #21
    BPN Viewer
    Join Date
    Jan 2008
    Location
    Fairfax, Virginia, United States
    Posts
    2,712
    Threads
    299
    Thank You Posts

    Default

    I was under the impression that the battery in camera had to be in place for the grip to work. Guess not . . .

    That said, I've been using both batteries (the manual talks about how to set which battery is used first, so I figure that's the way it is supposed to be) without the issues mentioned above.

  22. #22
    Robert O'Toole
    Guest

    Default

    Quote Originally Posted by Jim Poor View Post
    I was under the impression that the battery in camera had to be in place for the grip to work. Guess not . . .
    My EN-EL3e (camera Battery) and charger has been sitting unused since the first day I had the camera. Give it a try, it helps save weight.

    Robert

  23. #23
    Todd Frost
    Guest

    Default

    I've been using AA's in the grip without one in the body, works great (haven't been able to get batt cover yet).
    Todd

  24. #24
    BPN Viewer
    Join Date
    Dec 2007
    Location
    Cary, North Carolina
    Posts
    789
    Threads
    64
    Thank You Posts

    Default

    Quote Originally Posted by Fabs Forns View Post
    Good luck, Jim, hope this helps solved to your satisfaction. I know how frustrating this can be.
    Do you still have nightmares of the Mark III? :eek:

  25. #25
    Forum Participant
    Join Date
    Jan 2008
    Location
    Haverhill, Massachusetts
    Posts
    1,647
    Threads
    313
    Thank You Posts

    Default An Update

    Nikon sent me another replacement D300 and it failed after 146 frames...focus quit, top LCD indicator showed no juice and everything locked up. all new batteries, camera grip, CF cards.

    I've tested a number of reccomendations, new batteries, CF cards, etc which they've sent me and it's obvious that at least with the 500 VR I'm shooting, that there is a real electrical issue under load...and there are a fair number of us experiencing this to varying degrees.

    On top of the power issue, AF on BIF and moving subjects out past 25 yeard is extremely inconsistent.....and most of us are experiencing that as well.

    I informed them of my latest failure / findings and am in a hold pattern until they figure this issue out. Fortunately, they sent me a Dxs loaner along with the replacement D300, just in case.

  26. #26
    BPN Viewer
    Join Date
    Jan 2008
    Location
    Fairfax, Virginia, United States
    Posts
    2,712
    Threads
    299
    Thank You Posts

    Default

    Should have asked them for a loaner D3 instead for all the trouble.

  27. #27
    Forum Participant
    Join Date
    Jan 2008
    Location
    Haverhill, Massachusetts
    Posts
    1,647
    Threads
    313
    Thank You Posts

    Default The Problem With The D3

    For the area I shoot the D3 truly is pixel deprived if I'm going to crop at all and print at 16" x 20" which I frequently do for shows.

    Unless of course I sold the 500 VR and wwent with a 600 VR, but along with the expenses, the extra weight I think would e a definite burden when hiking miles of beach to shoot shorebirds, working up in the dunes, etc.

    I did shoot one for a day and compared it dieectly to images shot with a d300.

    The D3 IQ is absolutely better, but it just doesn't hold up anywhere near as well upon crop and uprez. For bew use or magazines / smaller prints it would be outstanding.

    Things are neither as big nor as accesible up here in the Northeast as they are in Florida / down south unfortunately.

  28. #28
    Co-Founder James Shadle's Avatar
    Join Date
    Oct 2007
    Location
    Valrico, Fl
    Posts
    5,108
    Threads
    1,419
    Thank You Posts
    Blog Entries
    11

    Default

    Here is how I fixed my D300 power issue.
    I cleaned all of the contacts, especially the contacts were the battery pack fits to the body.
    I used Deoxit, available from Radio Shack.
    It was really that simple to fix.

    Between Blake and I , we have 2 D300 bodies with no more issues.

    James

  29. #29
    Forum Participant
    Join Date
    Jan 2008
    Location
    Haverhill, Massachusetts
    Posts
    1,647
    Threads
    313
    Thank You Posts

    Default

    Hi James...

    I own stock in DeOxIT at this point.

    Myself and others have shown that in some cases, this is a cure...sometimes long lived and sometimes, the issues reappear that very same day.

    I have no doubt that there are functioning bodies out there, but there's a fair number which exhibit this issue as well.

  30. #30
    Jeff Wear
    Guest

    Default

    "On top of the power issue, AF on BIF and moving subjects out past 25 yeard is extremely inconsistent.....and most of us are experiencing that as well."
    I have not had the power issue but after 3 visits to nikon for repair I still have the same focus trouble with my d300

  31. #31
    Robert O'Toole
    Guest

    Default

    Quote Originally Posted by Jeff Wear View Post
    "On top of the power issue, AF on BIF and moving subjects out past 25 yeard is extremely inconsistent.....and most of us are experiencing that as well."
    I have not had the power issue but after 3 visits to nikon for repair I still have the same focus trouble with my d300
    Are you referring to AF accuracy results, as in viewing the images later, or are you speaking of AF lock aquisition. I find the D300 51 pt 3D focus very consistent, rock soild in fact with AF in general and aquisition is good on the 2-4 and even better with Prime lenses.

    Dont take this advice personally since I have never even met you obviously, I am just trying to help :)

    If you are getting inconsistent accruracy results maybe try a new technique, when the image is OOF dont take the picture, just lift and re-aquire AF lock. If it drops again, re-aquire. Dont press the shutter unless the image is tack sharp in the viewfinder. I lead workshops year round and co-lead for Arthur Morris year round as well and people that complain about new DSLR AF are usually the same people that shoot like paparazzi, they squeeze the trigger when the bird comes into view and will not lift until the bird is long gone. In the same amount of time they have taken 50 images I have taken maybe 4 images.

    Robert

  32. #32
    Jeff Wear
    Guest

    Default

    I find that locking on when tracking --not consistent almost nonexistence but have not used 51pt3d and the reason is I have not been out shooting just bifs in open sky .When I used 51 with any background =very bad results . Af at a distance bif or stationary has mixed results .I am not a machine gun shooter ,I also track and refocus but even this does not give me the results I will get with the d200 .After the camera came back from Nikon the 3rd time my over all is much better but the distance focus looks good in view finder but bad at home .
    I use 9 point almost all the time say 90% for action and mixed background . I use the 500 f4 80% time and I have not been able to go shooting enough to really tell but the last time out it was slow to focus but this I write off to me for the time until I can spend a day out shooting in all dif. light .I do not take this personally if I knew everything I would be shooting a canon -that was a joke . Thanks for the feed back . I know that Harry loves the 51 point but for the places I shoot it would make shooting anything else not so easy . I just thought of something I was wanting to ck for dust bunnies and tried to af on the clouds ,would not do it ???? I was shooting hummers and forgot about it till just now . This camera will be going back for it's 4th and final trip to nikon but not until I have a full day to shoot really try a few more things . Thanks Robert

  33. #33
    Fabs Forns
    Guest

    Default

    I was using the D300 today, with the 300/2.8 on full focus, 21 points, dynamic, working on hovering Hummingbirds, and it worked like a charm. Not a big fan of 3D here.

  34. #34
    Jeff Wear
    Guest

    Default

    Fabs was this with lots of background or more clear with them hovering above ??? I have not tried 21 as of yet

  35. #35
    Fabs Forns
    Guest

    Default

    Lots of background and flowers and mesh etc...

  36. #36
    BPN Viewer
    Join Date
    Jan 2008
    Location
    Viera, Florida
    Posts
    92
    Threads
    24
    Thank You Posts

    Default

    Jeff if you look at my response here (#8) you'll see that I like 51 points in only certain situations and I have yet to find any circumstances where the 3D has been useful.

  37. #37
    Jeff Wear
    Guest

    Default

    Harry I thought that was something you said in the other forum --I have had no luck with 51 and the 3d I feel the same .sorry did not go back and reread all posts again .Fabs thanks I will give 21 a shot also the hummers are all around right now

  38. #38
    Forum Participant
    Join Date
    Jan 2008
    Location
    Haverhill, Massachusetts
    Posts
    1,647
    Threads
    313
    Thank You Posts

    Default Some D300 Focus Comments.

    A) Nikon personally has advised 51 point 3D in the sky...personally I think it s*cks in anything except perfectly blue skies. If there are multiple targets it's useless, if there are clouds it will often jump to them and if the subject dips out of the sky and a background becomes present and you can forget about the shot. Have you folks tried shooting it with a subject flying along the surface of the water? Don't waste your time.

    B) I find the D300's AF to hunt badly on subjects in the sky (this is consistent tr hough five bodies and meets the same observations of many shooters I've spoken to). The subject can be white, brown, black gray whatever...when you combine the slow acquisition and inability to quickly lock without hunting, often times, the subject is locked.

    C) As far as :machine gunning" ...I don't. I use the AF-On button and may re-acquire several times while tracking in order to maintain AF...however, try doing that on a loon or a ring neck duck flying by...the actual time in the viewfinder is mere seconds.

    D) I shot a D2Xs loaner this weekend, which is CAM 2000. The D300 is supposed to be the new and improved CAM3500. I can tell you without a doubt, that based upon my experience shooting both cameras extensively, the older CAM2000 both acquires and locks much faster and easier, especially with low contrast targets.

    E) The D300 woks just fine on static subjects.

    F) I proved it to myself again yesterday, just using gulls for target practice. Inside about 25 yards they are a piece of cake. Out past 25 yards, the camera I'm shooting (I'm for the most part actually not shooting it until they figure out how to fix it), the modus operandi is to hunt past the subject to infinity, then hunt inboard and then MAYBE attain a lock...just about the time the subject is leaving the prime image position or even flying out of the frame itself.

  39. #39
    Robert O'Toole
    Guest

    Default

    Jim dont take this the wrong way but are you using an AF point and placing it on something with contrast when you attemp to AF or are you just pointing. I know this quesion might sound silly to many people but you would not believe how many people shoot Nikon Dynamic or Canon 45 point not knowing this. Also do you have the tracking fast or slow?

    My D300 AF experience is very different, I find AF against sky, water, BG, accurate and quick. No hunting at all. BIF close, far, full frame, more than full frame.

    Robert
    Last edited by Robert O'Toole; 04-06-2008 at 09:52 PM. Reason: spelling

  40. #40
    BPN Viewer
    Join Date
    Dec 2007
    Posts
    61
    Threads
    12
    Thank You Posts

    Default

    Quote Originally Posted by Robert O'Toole View Post
    Jim dont take this the wrong way but are you using an AF point and placing it on something with contrast when you attemp to AF or are you just pointing. I know this quesion might sound silly to many people but you wound not believe how many people shot Nikon Dynamic or Canon 45 point not knowing this. Also do you have the tracking fast or slow?

    My D300 AF experience is very different, I find AF against sky, water, BG, accurate and quick. No hunting at all. BIF close, far, full frame, more than full frame.

    Robert
    Robert, I have two D300's and find the focus as you do, it's as good or better than my Canon Mark 2N

  41. #41
    Co-Founder James Shadle's Avatar
    Join Date
    Oct 2007
    Location
    Valrico, Fl
    Posts
    5,108
    Threads
    1,419
    Thank You Posts
    Blog Entries
    11

    Default

    Jim,
    Here is what I have experienced 50,000 frames in.

    "A) Nikon personally has advised 51 point 3D in the sky...personally I think it s*cks in anything except perfectly blue skies. If there are multiple targets it's useless, if there are clouds it will often jump to them and if the subject dips out of the sky and a background becomes present and you can forget about the shot. Have you folks tried shooting it with a subject flying along the surface of the water? Don't waste your time."

    I prefer 3D 90% of the time. From my experience so far ,it actually preforms better in situations that cause other AF systems to fail.
    It is my AF function of choice when photographing flying birds in front of mangroves or other high contrast backgrounds.

    Now I do go to 21 point for BIF across smooth water. I have the custom function set so all I do is press and roll and the AF setting changes. Just that fast.


    "B) I find the D300's AF to hunt badly on subjects in the sky (this is consistent tr hough five bodies and meets the same observations of many shooters I've spoken to). The subject can be white, brown, black gray whatever...when you combine the slow acquisition and inability to quickly lock without hunting, often times, the subject is locked."

    If I hit my target, using Nikon's Dynamic AF, starting with the center sensor and "handing it off" to 51 point 3D, I have experienced no hunting!
    Now if I miss that can be a different subject.


    "C) As far as :machine gunning" ...I don't. I use the AF-On button and may re-acquire several times while tracking in order to maintain AF...however, try doing that on a loon or a ring neck duck flying by...the actual time in the viewfinder is mere seconds."

    The AF- On button can be difficult to use at high frame rates when trying to re-acquire focus.
    I use the shutter button, however I have found that I need to re-acquire focus less than I used to and trust the 3D tracking more.

    I have used 3D AF successfully on many bird species so far including Oyster Catchers,
    Falcon, Ducks Tree Swallow etc.


    "D) I shot a D2Xs loaner this weekend, which is CAM 2000. The D300 is supposed to be the new and improved CAM3500. I can tell you without a doubt, that based upon my experience shooting both cameras extensively, the older CAM2000 both acquires and locks much faster and easier, especially with low contrast targets."

    After 200,000 +/- shutter actuations with a D2X and now 50,000 between 2 of D300s,
    I have to say I could not disagree more strongly (from my experience):)


    "E) The D300 woks just fine on static subjects."

    I agree !


    F) "the modus operandi is to hunt past the subject to infinity, then hunt inboard and then MAYBE attain a lock."

    Jim,
    What AF mode are you starting with. If the sensor is on the subject and the subject has enough contrast it will not hunt.
    Hunting is caused by AF actuation with nothing in front of the sensor.

    Are you starting out in Auto-Area AF?

    Just my experiences with the 2 D300's I own and that 3 of my close friends have.

    All of us with no problems. I hope this gets figured out for you.

    James

  42. #42
    Forum Participant
    Join Date
    Jan 2008
    Location
    Haverhill, Massachusetts
    Posts
    1,647
    Threads
    313
    Thank You Posts

    Default Hello James

    I guess I need one which works like yours does :)

    Again, Saturday I shot both the D2Xs and the D300 and at least on the D300 I have...the Xs simply blows it away relative to initial acquisition and AF speed. I will say that if and when the D300 AF does lock, it tracks much better that previous Nikon AF systems.

    First...My AF parameters are AF-C, CH, 7fps, release set to release + focus, lock on set to OFF unless I'd be shooting terns or something flying into grass or a BIF which might fly across a distant background. In the sky, I shoot single point if my subjects are close enough and large enough, 9 point otherwise if there are clouds or multiple birds, and 51 point non 3D if there is absolutely no clouds and only a single subject.

    I honestly can't fathom how you folks are using 51 point 3D on moving subjects. A number of us who live close by have tried it and found it quite honestly to be useless as the points jump all over the place and frequently, especially if a background or water is involved, focuses on the background.

    I don't simply point the camera at the subject and expect it to find it. I frequently shoot single point and I think I'm pretty adept at placing the single reticule on the intersection of the birds shoulder / neck and doing my best to keep it there.

    Between 5 that continually shut themselves down and lock up and the AF on this body...it's a good thing they sent me a D2Xs loaner.

    I'm really wondering...what serial # ranges are you folks in? I'm at 30264XX.

  43. #43
    Blake Shadle
    Guest

    Default

    I've just passed 1000 shutter actuations on my new D300. I couldn't be happier. I'm amazed at the AF. I have a similar experience to my dad, except on a smaller scale ;) If I'm using a lens that can AF, I'm using 51 points 3D continuous focus. I just tried the dynamic point for single focus over the weekend, and that's pretty dadgum cool too!

  44. #44
    BPN Viewer
    Join Date
    Jan 2008
    Posts
    35
    Threads
    14
    Thank You Posts

    Default

    I've had the same issue on my D3 where the battery shows dead but it isn't. Appears to be a problem with contacts. I usally clean them with a pencil eraser and that fixes the problem for a while, but still it happens to often. That is with and without my teleconverter.

  45. #45
    Co-Founder James Shadle's Avatar
    Join Date
    Oct 2007
    Location
    Valrico, Fl
    Posts
    5,108
    Threads
    1,419
    Thank You Posts
    Blog Entries
    11

    Default

    Monte,
    Be careful with an eraser. You can and will take the gold plating off!

    This is a better solution:"
    "I cleaned all of the contacts, especially the contacts were the battery pack fits to the body.
    I used Deoxit, available from Radio Shack."

    Are you using OE or aftermarket batteries in the D3?

  46. #46
    BPN Viewer
    Join Date
    Jan 2008
    Location
    Gainesville, Florida, USA
    Posts
    17
    Thank You Posts

    Default

    Does anyone know the difference between 3D and non-3D mode, and why would you use one over the other? The user manual is ambiguous as usual.

  47. #47
    Robert O'Toole
    Guest

    Default

    Here is the quick answer, there is quite a bit of material on the web covering this subject.

    The D300 and D3 use a 1005 pixel RGB AE sensor. This sensor is used for AE, AF and even white balance and is the only camera brand to offer this. In 3D mode the AF system uses information from the RGB sensor. It uses face/shape and scene recognition in addition to color information to make AF decisions. This can help with AF tracking as it will use color to recognize the subject and differentiate it from the BG. Canon and all the other AF systems do not have any system like this. They can only process B&W contrast to AF.

    When you get some free time here is a huge list of D300 links

    Robert

  48. #48
    robert hazelwood
    Guest

    Default

    I too am having the dead battery indication when I tried to use a Kenko TC with my 18-200mm zoom. One or two shots and screen goes blank and dead battery indicated.

    Robert Hazelwood

  49. #49
    Forum Participant
    Join Date
    Jan 2008
    Location
    Haverhill, Massachusetts
    Posts
    1,647
    Threads
    313
    Thank You Posts

    Default Hi Bob

    I suppose I should give an update here.

    A) 5th body had the same issues and Nikon provided the option to repair / replace / refund.

    I opted for a refund specifically because I was willing to try one last time and decided that I wanted to purchase my own, rather than getting another older serial# replacement again.

    I therefore purchased two bodies from my dealer...both in the 3125XXX range for serial #'s.

    I've had but a very short stint with one of them and had no battery issues and the AF performed substantially better than anything I've had to date.

    Nikon has said nothing to me relative to either the dead battery or AF issues other than they are aware that for some photographers, this has been an issue and that they were confident that they would get to the root cause at some point in time.

    In direct response to your situation...I know of 2 photographers who have been advised directly by Nikon not to use Kenko TC's.

  50. #50
    Forum Participant
    Join Date
    Jan 2008
    Location
    Haverhill, Massachusetts
    Posts
    1,647
    Threads
    313
    Thank You Posts

    Default 51 Point 3D tracking

    While Robert is correct in his explanation, it should be noted that this mode is fine tuned for color recognition of human skin tones.

    Direct correspondence with Nikon advised that this mode will work with wide open skies, but it should not be utilized with any sort of background when shooting BIF shots.

    It also slows the AF / frame rate a fair bit, probably due to the amount of processing occurring.

    The D300 does not have the same AF processing capabilities that the D3 has.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Web Analytics