Results 1 to 20 of 20

Thread: Glare on Glasses

  1. #1
    Julie Kenward
    Guest

    Default Glare on Glasses

    Attached Images Attached Images
     
    I've started to venture into doing family portraits as a way to make some extra money to fuel my passion for Canon "L" lenses and I have a question: What do you do when you have someone in an outside setting who wears glasses and you can't find an angle to get all the glare out?

    Am I missing something in camera that I should be doing differently or is there a way to correct this in post-processing? I did clone some of the distractions out in this close-up but in many of the images the woman is further back in a large group of people and the glare is really distracting.

    Anybody?

  2. #2
    Alfred Forns
    Guest

    Default

    Try a polarizer Jules !!!! I'm sure removing the glare here is possible but a real pain !!!

  3. #3
    Forum Participant
    Join Date
    Feb 2008
    Location
    Parsonsfield, Maine
    Posts
    2,183
    Threads
    199
    Thank You Posts

    Default

    Ask them to remove the glasses.

  4. #4
    Julie Kenward
    Guest

    Default

    Grady, I thought about that but they seemed to be such a part of who she is. I was afraid the family would look back on the photos and not think they were "mom."

    Al, if I use a polarizer won't that change the hue of everyone's skin tones? If so, is that easily corrected in pp? I haven't used a polarizer much but always thought it kind of added a blue glow to everything. Am I thinking of something else?

  5. #5
    Alfred Forns
    Guest

    Default

    Not really Jules You can use one with a slight warming effect

    Fabs had an idea.... you can ask them to lower them just a fraction the the reflection will go away. A trick portrait people use, had no idea !!!

  6. #6
    Julie Kenward
    Guest

    Default

    Great idea! Tell Fabs I said gracias!

  7. #7
    Forum Participant
    Join Date
    Jan 2008
    Location
    Sacramento, CA
    Posts
    3,469
    Threads
    495
    Thank You Posts

    Default

    Attached Images Attached Images
     
    Hi Julie. I did a shadow and highlight adjustment on the glasses only. It seems to have improved the situation. I have heard that you can use a pair of glasses with out glass, just frames, if you need your subject to be wearing the specs:D

  8. #8
    Alfred Forns
    Guest

    Default

    I like what you did here Dan Looks very natural and just a little glare adds to the image !!! Neat !!!

  9. #9
    Julie Kenward
    Guest

    Default

    Dan, that's fantastic. I would have never thought of that! You've saved the day.

  10. #10
    Forum Participant
    Join Date
    Jan 2008
    Location
    Sacramento, CA
    Posts
    3,469
    Threads
    495
    Thank You Posts

    Default

    Your welcome Ma'am. I just "trial and error" everything and get lucky once in a while.:)

  11. #11
    Beth Goffe
    Guest

    Default

    Julie, I like these images you're posting quite a bit. You can really get a sense of the personality of your subjects. Looks like a lot of fun!

  12. #12
    Forum Participant
    Join Date
    Feb 2008
    Location
    Parsonsfield, Maine
    Posts
    2,183
    Threads
    199
    Thank You Posts

    Default

    Jules, how about asking them to put the glasses on a chain and leave them on her neck. I wear them, but not all the time. I understand she might wear them constantly, so she might be "look" different and not "like mom". Never hurts to ask. Just smile when you do. :)

  13. #13
    BPN Viewer
    Join Date
    Feb 2008
    Location
    Tampa, Florida, United States
    Posts
    599
    Threads
    100
    Thank You Posts

    Default

    Hi Jules,
    Great moment you captured!

    Dan's post looks great! I like the suggestion about using glasses without the lenses. A lot of people have old prescriptions lying around they could remove the glass from.

    This brought back memories!

    I worked for a photographer many many years ago, who did weddings. Back in the film days, I actually had to retouch the reflection in the glasses by hand - directly on the print(s) using pigments and very fine brushes to redraw the details in the eyes. The photographer usually tried to avoid glare, but sometimes it required painting in quite a lot of detail.... This was back when WordPerfect was still in its infancy - so no Photoshop!!

    You might check with some of the wedding photographers in the area - I'm sure they deal with it all the time!

    Amy D.

  14. #14
    John T. Watson
    Guest

    Default

    If you have any photo's of her without the glare, you can select the non glare glasses, put it on it's own layer and move it to this photo.

    John

  15. #15
    Joseph Martines
    Guest

    Default

    What about trying a polarizer and doing a color balance??

    I would borrow a friends polarizer and do some experimenting. Shouldn't cost anything.

  16. #16
    BPN Viewer
    Join Date
    Jan 2008
    Location
    Glen Allen, VA
    Posts
    83
    Threads
    12
    Thank You Posts

    Default

    Attached Images Attached Images
     
    I hope you don't mind but after bringing in the glasses they looked a little pasty face, so I darkened their skin a bit.

  17. #17
    Julie Kenward
    Guest

    Default

    These are all wonderful suggestions...thank you all so much for the great ideas! I'll definitely be trying some of these out.

  18. #18
    Howard Burkert
    Guest

    Default

    Julie, I deal with this on a daily basis. You have 3 options. One... lift the back of the glasses off the ear's (about 1 inch), this decreases the angle of reflectance. Two... remove the lenses. Three.. On each pose you do , have the subject reach up and remove the glasses, without moving thier head,take a couple of shots with the glasses off(stay the same distance). Then in PS make a selection around both lenses of the glasses leaving the metal of the frame showing. Do the first selection and then hold down the shift key do make your second selection.(feather at 1 pixel). Now minimise this image. Next on the image of the eyes, crop the eyes at 1"X 2 1/2" @300 dpi. Then do a Ctrl A and then a Ctrl C. Now reactivate the base image and go to... edit>paste into. Do a Ctrl T to free transform the eyes to the proper size. Hit enter, then the V key to move them into place. Free transform as many times as needed but always hold down the shift key to keep the proportions right.
    If option 1 works you got it made. If option 2 works you worked a little extra. Option 3 works very well but you earn your money.
    Best,
    Howard

  19. #19
    Julie Kenward
    Guest

    Default

    Wow, Howard...you've got this down to a science. Any advice about people who wear transitional lenses when shooting outside? Should we just remove them from the frame? I had this happen this past weekend and had to do a ton of shadow/highlight adjustments just so you could see their eyes beneath the glasses.

  20. #20
    Howard Burkert
    Guest

    Default

    Julie, Transitional lenses are not that much of a problem. Buy some dark soft material (fannel works well) have your subject keep the glasses wrapped in the material until you are ready to take the portrait. After finishing that pose or grouping the glasses are then returned to the wrap. Your 6 to 8 images should be done quickly. After you set up your next pose or grouping do the same.
    This will take care of the transition lenses but....glare still remains a factor. So use the options above. Also maybe a simple (chin down) command will help with glare. Also you could suggest they get empty frames from thier eye doctor. Pre session consultation is a big part of of a family portrait.Don,t be afraid to tell them what you want them to do.
    Best,
    Howard

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Web Analytics