Jim Poor
10-29-2008, 11:59 PM
Here's an interesting issue I'm having.
When I select a brush or just about any tool, the actual brush stroke on my image is about 50% smaller than the cursor size.
I've tried all the settings under Preferences > Cursors and have had no luck.
I'll attach a couple examples.
The first is a © brush I made. Note how much smaller the result is than the cursor indicates.
http://www.pbase.com/jimpoor/image/105219615/original.jpg
Now this is a simple brush tool with hardness set to 100%
The ring on the outside is the cursor, and the dot is the resulting stroke.
http://www.pbase.com/jimpoor/image/105228969/original.jpg
I've checked, and my settings are all set to pixels rather than points, and changing between the two settings has no effect.
I'm stumped.
When I select a brush or just about any tool, the actual brush stroke on my image is about 50% smaller than the cursor size.
I've tried all the settings under Preferences > Cursors and have had no luck.
I'll attach a couple examples.
The first is a © brush I made. Note how much smaller the result is than the cursor indicates.
http://www.pbase.com/jimpoor/image/105219615/original.jpg
Now this is a simple brush tool with hardness set to 100%
The ring on the outside is the cursor, and the dot is the resulting stroke.
http://www.pbase.com/jimpoor/image/105228969/original.jpg
I've checked, and my settings are all set to pixels rather than points, and changing between the two settings has no effect.
I'm stumped.